Fure Resin Remover, 500 ml

FURE® Tar Remover is a highly effective hydrocarbon-based solution designed for the removal of asfalt, pitch, and glue. It assists in cleansing tar and glue stains from paint surfaces, rims, glass, and plastic materials. This product is particularly effective in eradicating road salt from car paint, which is frequently applied at the onset and conclusion of winter, rendering the car's paint surface sticky.

FURE Tar Remover also functions as a cold degreaser. Whether dealing with an oily engine in a car or motorcycle or greasy chains on a bicycle, this product dissolves even the most persistent oily dirt. However, the product does leave a slight oily residue on the surface. Therefore, it is advisable to follow up the cleaning process with products such as the Fure Interior Cleaner or Fure Pre-Wash Foam.

Instructions for Use:

Thoroughly wash the car to eliminate excess dirt. Allow the surfaces to dry slightly, as residual water on the surface can dilute the product. Spray FURE Tar and Glue Remover onto the dry surface, allowing it to work for approximately one minute. You will observe the tar spots beginning to dissolve and run down in brown streaks. Wipe away the stains using a microfiber cloth. Rinse thoroughly with a pressure washer or hose. Utilize chemical-resistant protective gloves. Avoid use in direct sunlight or on hot surfaces. Do not allow the product to dry on the surface. Please read the safety data sheet before use.

FURE's Quick Tip:

When starting to remove sticky road salt from the car's paint surface, apply the tar remover comprehensively on the car's sides, rear, and front. Next, spray Fure Pre-Wash Foam onto the surface and allow it to take effect. During rinsing, you will notice how the additional action effectively removes the sticky salt from the paint surface.