Fure Pre-Wash Detergent, 5L

Fure® Pre-Wash Foam is a wax-safe and effective foam cleaner for the exterior surfaces of cars. The detergent does not contain any coloring agents, wax, or other gloss or protection-enhancing substances. It can be used with a foam lance attached to a pressure washer or with a pressure sprayer/spray bottle. It is effective against summer bugs as well as winter salt. Fure Pre-Wash is also very economical, as only about 1–1.5 dl of the product is needed to wash one car. The product is biodegradable.

Fure Pre-Wash is a very versatile product. It can be used for washing large vehicles such as Sprinters, motorhomes, and caravans. When there is a lot of surface to clean, the detergent saves a significant amount of time.

If the car has not been washed for a long time, it is advisable to apply Fure Tar Remover before the pre-wash to help dissolve stubborn dirt and road salt.

Instructions for use:

Dilute Fure Pre-Wash 1:10 if using a foam lance attached to a pressure washer, and 1:20 if using a pressure sprayer. Allow the detergent to work for 5-10 minutes, then rinse the surfaces thoroughly with water. Do not let the product dry on the surface.

Fure Pre-Wash can be used in two ways with a foam lance. You can either pour the product undiluted into the foam lance and adjust the mixing ratio to lean (this is recommended by us at Fure), or alternatively, pour 1–1.5 dl into the foam lance, fill the rest with water, and set the mixing ratio to full.